Sometimes you get a trouble code but there really isn’t anything wrong. Follow this Real Fix to see how this Buick Enclave with a code P0011 had a problem with the computer that was easily resolved.
Vehicle
2008 Buick Enclave CXL 3.6L
Title
P0011, Reprogrammed Powertrain Control Module
Complaint
The customer states the check engine light is on.
Cause
Connected a scan tool and found code P0011 – A Camshaft Position – Timing Over-Advanced or System Performance (Bank 1) . At idle, used the scan tool to monitor live data and found the camshaft position sensor signal parameter was within specifications. Increased the engine speed to 1500 RPM, used the scan tool to observe the camshaft phase angle data while commanding the camshaft position actuator solenoid from 0% to 100% and found the actual camshaft phase angle followed the commanded camshaft phase angle. Upon further inspection of live data, found the powertrain control module did not have the correct calibration, which caused the code to set.
Correction
Reprogrammed the powertrain control module, cleared codes, performed a road test and verified the vehicle operated properly. The check engine light did not illuminate and no fault codes returned.
SureTrackĀ® is a powerful value-added feature available with select Snap-on diagnostics tools. It offers an exclusive combination of expert knowledge and detailed parts replacement records, all wrapped in an interactive community.
Want more? Click here for more information on using SureTrack.
Looking for diagnostic tools? Click here to request more information on Snap-on diagnostic tools.
New or Expired SureTrack users: Click here for authorization key instructions.